Shelving - Freestanding
=================================================================================
× 1

.. image:: _static/image_26.png

Materials
----------------
- 2x T Slot Upright Freestanding
- 2x Tie Bar 600mm
- 8x M12 Nuts and Bolts
- 4x adjustable feet with M8 thread
- 4x Castor Wheels with M8 thread (alternative to adjustable feet)
- 10x U Bracket
- 5x Light Shelf
- 1x Shelf without light
- 20x Grow Bar

Tools
----------------
- 12mm spanner
- 14mm spanner

Method
----------------
1. Make sure you have sufficient space to set up your shelving. Setting up the Shelf is more manageable with 2 people but can be done alone if necessary.

.. image:: _static/image_27.png
.. image:: _static/image_28.png

2. Connect adjustable feet or castor wheels to the bottom of the twin slot profiles.
3. Connect the Twin Slot Profiles with Tie Bars and the required Nuts & Bolts. If you are alone, we recommend conducting step 2 on the ground.
4. Tip the unit over and connect feet or castor wheels to the threaded holes in the bottom
5. Set the unit up again.

.. image:: _static/image_29.png

6. Now, simply slot in the U Brackets, leaving 6 holes in between each bracket.

.. image:: _static/image_30.png

7. Put the light shelves on top of the U Brackets so they can slide to the front and back. The cables of the light shelf should come out towards the back left of the unit.
8. Done